Fisher & Paykel WH1160H1 Washer Manual

The Fisher & Paykel WH1160H1 is a high-efficiency front-loading washing machine designed to provide superior cleaning performance while being gentle on your clothes. It features a variety of wash cycles, customizable settings, and advanced technology to ensure optimal washing results. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Front-loading design, multiple wash cycles, energy-efficient operation, large capacity drum, and user-friendly controls.

Feature	Description
Multiple Wash Cycles	Variety of cycles for different fabric types and soil levels.
Energy Efficiency	Designed to use less water and energy compared to traditional washers.
Large Capacity Drum	Can accommodate large loads, reducing the number of washes needed.
Smart Technology	Automatically adjusts wash settings based on load size and fabric type.
Delay Start	Allows you to set a wash to start at a later time.

Installation

Unpack and inspect contents. Ensure the washer is placed on a stable surface.

Connect water supply: Attach hoses to the water inlet valves.
Level the washer: Adjust the feet to ensure the washer is level.
Plug into AC power: Ensure the outlet is grounded.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow on-screen prompts to configure settings.

Select language: Choose your preferred language from the menu.
Set water hardness: Adjust settings based on your water quality.
Run a test cycle: Perform a test wash to ensure everything is functioning correctly.

CAUTION! Ensure the washer is level before use.

Specifications

Model: WH1160H1.
Capacity: 11 kg.
Energy Rating: 4.5 stars.
Water Consumption: 50 liters per cycle.
Dimensions: 850mm (H) x 600mm (W) x 600mm (D).
Power Supply: 220-240V, 50Hz.
Weight: 75 kg.

Controls and Settings

Access the control panel for wash cycle selection, temperature settings, and spin speed adjustments.

Control Panel: Power button, cycle selector, start/pause button, and display screen.

Connecting Water Supply

Ensure proper connection to the hot and cold water supply.

Turn off water supply before connecting hoses.
Match hoses to the correct inlet valves (hot/cold).
Check for leaks after connections are made.

Tip: Use new hoses for best results.

Operating the Washer

Follow these steps to operate the washer effectively.

Load laundry: Do not overload the drum.
Select wash cycle: Choose the appropriate cycle for your load.
Start the wash: Press the start button to begin.
Monitor progress: Check the display for cycle status.

WARNING! Do not open the door during operation.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the detergent drawer regularly.
Check and clean the filter as needed.
Wipe down the exterior with a damp cloth.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power connection and outlet.
No water filling	Hoses kinked	Ensure hoses are not kinked or blocked.
Excessive vibration	Unlevel washer	Adjust feet to level the washer.
Door won't open	Cycle not complete	Wait for cycle to finish before opening.

Reset: Unplug for 5 minutes to reset the washer.

Service: For support, contact Fisher & Paykel customer service.