Fisher & Paykel WH1260F2 Washer Manual

The Fisher & Paykel WH1260F2 is a front-loading washing machine designed for efficiency and ease of use. It features a 12kg capacity, multiple wash programs, and advanced technology to ensure optimal cleaning performance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Front-loading design, 12kg capacity, multiple wash cycles, energy-efficient motor, and smart technology for optimal wash performance.

Feature	Description
12kg Capacity	Large capacity for family-sized loads
Multiple Wash Programs	Various settings for different fabric types
Energy Efficient	Designed to save water and electricity
Smart Technology	Automatically adjusts wash settings for optimal performance
Delay Start	Allows you to set a wash cycle to start later
Child Lock	Prevents accidental changes to settings
Self-Cleaning	Maintains cleanliness of the drum

Installation

Unpack and inspect contents. Place the washer on a stable surface and ensure it is level.

Connect water supply: Attach hoses to the water inlet.
Connect drain hose: Ensure it is securely placed in the drain.
Plug into AC power: Ensure the outlet is grounded.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow on-screen prompts to set preferences.

Select language: Choose your preferred language from the menu.
Set water hardness: Adjust settings based on your water quality.
Run a test cycle: Ensure the washer operates correctly.

CAUTION! Ensure the washer is level to avoid vibrations during operation.

Specifications

Model: WH1260F2
Capacity: 12kg
Dimensions: 850mm H x 600mm W x 650mm D
Energy Rating: 4 stars
Water Consumption: 50L per cycle
Spin Speed: 1200 RPM
Noise Level: 50 dB
Power Supply: 220-240V AC, 50Hz

Controls and Settings

Access settings via the control panel. Key buttons include POWER, START/PAUSE, and program selection.

Display: Shows selected wash program and remaining time.

Adjust settings for temperature, spin speed, and soil level as needed.

Connecting Water Supply

Ensure proper connection to the water supply for optimal performance.

Turn off water supply before connecting hoses.
Match hoses to the correct inlet (hot/cold).
Check for leaks after connections are made.

Tip: Use Teflon tape on threads to prevent leaks.

Operating the Washer

Follow these steps to operate the washer effectively.

Load laundry: Do not overload the drum.
Select wash program: Choose based on fabric type.
Start the cycle: Press START/PAUSE to begin.
Unload after completion: Remove clothes promptly to avoid wrinkles.

WARNING! Do not open the door during operation.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the filter monthly to prevent blockages.
Wipe down the exterior with a damp cloth.
Run a maintenance wash every few months.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power connection and outlet.
No water filling	Blocked inlet filter	Clean the inlet filter.
Excessive vibrations	Unlevel washer	Adjust the feet to level the washer.
Door won't open	Cycle not complete	Wait for the cycle to finish.
Odor in drum	Residual moisture	Run a maintenance wash with vinegar.

Reset: Refer to the user manual for reset instructions.

Service: Contact Fisher & Paykel support for assistance.